| Power input |
DC 9~36V |
| Working current |
-- |
| No. |
2*serial port Serial port 1: RS232/485 Serial port 2: RS485 |
| Band rate |
600~230400bps, user-defined baud rate is supported |
| Data bits |
7, 8 |
| Stop bits |
1, 2 |
| Parity |
None, Even, Odd |
| DI |
2*DI, 0 - 2 V detected as logic low, 9 - 36 V detected as logic high |
| DO |
2*Relays, DC contacts rating @R(at resistive load)10A / 28V DC AC contacts rating @R(at resistive load)10A / 277V AC,NO AC contacts rating @R(at resistive load)5A /250V AC, NC |
| AI |
2 x Analog input 4-20mA |
| Dimension |
79.6x 58 x110 (mm) |
| Housing |
ABS housing, IP30 protection |
| Installation |
Din rail mounting, wall mounting |
| ESD |
IEC61000-4-2,Level 3,class B,contact 6KV,air 8KV |
| Surge |
IEC61000-4-5,Level 3,class B |
| EFT |
IEC61000-4-4,Level 3,class B |
| POW |
ON: Gateway is powered up OFF: Gateway is not power up |
| WORK |
When the device is working properly, it blinks for 1s frequency |
| NET |
Blinking when the wan connects to internet OFF when there is no network |
| DATA |
Blinking when serial port is transmitting data |
| DO status |
Light on, the channel output is activated |
| DI status |
Light on, the channel is activated by input signal |
| Cellular |
LTE Cat4, Global Frequency |
| Ethernet |
1*WAN/LAN + 1*LAN 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
| Frequency |
TDD-LTE: B34/38/39/40/41 FDD-LTE: B1/2/3/4/5/7/8/12/13/18/19/20/25/26/28/66 WCDMA:B1/2/4/5/6/8/19 GSM/EDGE:B2/3/5/8 |
| SIM |
1*Micro SIM |
| Antenna |
1*SMA-Female |
| Network Protocols |
ICMP,IPv4,IP,ARP,TCP,UDP,DHCP,DNS,HTTP,MQTT,SNMP |
| Configuration method |
Built-in webpage |
| Modbus Gateway |
Modbus RTU/TCP protocol conversion |
| Linkage control |
Supported. Data collection points, DI, and AI can be used as trigger and executed by DO |
| IP Routing |
Static routing |
| NTP |
√ |
| VPN |
PPTP, L2TP, *OpenVPN |
| SNMP |
√ |
| Approvals |
CE*, FCC*, ROHS* |